Multiple Effect Evaporator for Desulfurization and Desalination

Multiple-effect Evaporation SystemWide:Multi-effect falling film evaporators mainly adapts in continuous evaporation and concentration under low temperature,Can process milk,glucose,starch,xylose,pharmaceutical,biological engineering,environmental pr

Technical Feature

  • 200 Per Year
  • Seaworthy Packing
  • L/C, T/T
Send Standard Inquiry Add Inquiry List

0 Add Favorite

$100~900

PRIMARY PARAMETERS

Model NO.
TKE-055
Structure Material
Metal Material
Type
Stainless Steel Heating Equipment
Style
Steel Type
Distilled Method
Direct Evapoating
Specification
CE, ISO, SGS
HS Code
8419899090
Principle
Regenerative Heat Exchanger
Core
Core Evaporative Heat Exchanger
Application
Heater, Cooler, Vaporizer, Condenser
Heat Transfer Surface
Tubular Heat Exchanger
Trademark
Taikang
Origin
China

DETAIL DESCRIPTION



Multiple-effect Evaporation System
Wide:Multi-effect falling film evaporators mainly adapts in continuous evaporation and concentration under low temperature,Can process milk,glucose,starch,xylose,pharmaceutical,biological engineering,environmental protection,waste liquid recycling etc; Especially suitable for processing the material with character of heat sensitive,viscosity and foamability.The machine has characteristics of high heat transfer efficiency,material heating In short time etc.
Components:Evaporators in every stage,separators in every stage,condenser,heat pressure pump,sterilizer,insulating tube,material transfer pumps in every stage,condensate water pump,operation platform,electric meter control cabinet,valve,pipeline etc.
Features:
1.High heat transfer efficiency and material heating In short time realized for the heating system even heated with steam and feed liquid evaporated in flow film style,The equipment has smaller energy consumption,Steam consumption and cool water circulation amount if equipped with heat pressure pump.
2.Feed liquid evaporated while accelerated flow downward along the pipe wall that suitable for evaporation and concentration of high viscosity material.
3.Liquid heated in very short time for it inner film evaporated in every tube which is highly suitable for food concentration,can maximum preserve food nutritious.
4.Whole process operated under vacuum condition Which meet the sanitary requirement and environmental protection requirement,Meanwhile can significantly reduce the evaporation temperature.If equipped with heat pressure pump,part of secondary steam will be re-inhaled and mixed with live steam.Steam pass through pump, spray into heating shell,spread rapidly and make liquid heated gently,is very suitable for concentration of heat sensitive products.
5.Equipment suitable for evaporation and concentration of foamability material, Liquid film evaporated in heating tube then formed liquid-vapor separate,meanwhile the most part of feed extracted from the bottom of cylinder,Only small part of feed liquid and all secondary steam enter into separator,therefore Feed liquid foam formed can be completely avoided in the whole process.
6.Equipment can also sterilize food Feed liquid flow to sterilizer after preheated,Temperature up to 94ºCand lasting for 24 seconds,Then flow into first stage,Liquid evaporated in seconds then temperature drop at once.
7.Equipping with CIP cleaning system,clean in spot,operated conveniently without dead angle.
8.Continuous feed material and discharge material.
9.Can equip with automatic system,automatic control feed material capacity,heat temperature and discharge viscosity and cleaning.Can equip with protection facilities in case of suddenly blackout,break down which will cause trouble with heat sensitive products,other safeties,alarm facilities can achieve automatic operate and control.

Send Consultations Sending PUBLIC question and getting response from the supplier

Send Only your public informations will be shown

All Consultations