Potato Starch Production Line/Potato Flour Making Machine

1.Machine introduction:

The processing technology is describing briefly as following: raw material washing, peeling off, general crushing, fine 

crushing, separating of residue and starch slurry, starch slurry refining, dewatering, airflow drying, dressing and packing.

Washing &Crushing Section

potato, the material is sent to cage washer through scrape board to get the result of decontamination, cleaning and peeling . Then through a paddlewashing slot, material is sent to crash section. We adopt the rasper to crash materials. Compared with traditional crasher, it has the large capacity, high starch dissociation degree features, which are essential to get high starch recovery.

Milling and grinding section

Grinding clean potato root into cassava slurry to make it easy dewatering and drying.

Concentrating Section

The crashed material is sent to centrifugal sieve through pump to extract starch and separate potato residues. Centrifugal sieve group are 4 or 5 stages, the front stages is to extract starch and the last stage is to dewater the potato  residues. The whole stage adopts countercurrent washing to get the best results and saving water.

De-hydrating section  

Sending the fine slurry to dewatering machine to remove the moisture inside the slurry, and then send it to the air dryer. Compared with other starch, it is more suitable for potato starch to dewater by vacuum filter. Moisture content of dewatered starch is 38~40%. Wet starch is sent to drying system through belt conveyer. 

Drying section

Drying the dewatered cassava flour in the air dryer to get dry product. Dried starch reaches sieving system. High efficiency cooling starch sifter is used to cool starch and get the best starch 
2.Technical parameters:

My price is not the lowest in China as for high quality,but we promise for the same quality and collocation,my price is the most favorite,for the same price ,my quality is definitely superior.to other brand.

2.Do you have OEM service?Do you supply the parts?

Yes,we do,as long as you provide us your drawing and detailed requirements.

3.Do you have agent or service center in my country?

We have some partnership in several countries as Indonesia,Brazil,USA etc,you are warmly welcomed to work as our agent,at this moment,we have no service centers abroad,but we can provide overseas spot and online technical service in time.

4.How can we easily find out the most fit centrifuges?

We have experienced engineer team to help you make the model selection,as long as you provide us the detailed processing material characteristics. 

5.What payment mode you accept?

  TT , LC at sight or others . 

Note: The prodcution capacity is based on water only, just for reference. Different feeding solution will of different production capacity.

If you have special requirements, please feel free to contact us.

Contact Information:

Contact name: Jessie Zhao

Phone: +86-18641998048