Potable Water Desinfection Device Auto-cleaning 254nm UV Germicidal Sterilizerer
Working principle
The device adopts a special high strength non ozone ultraviolet sterilizing lamp and stainless steel barrel body odor whose inner wall specially treated by micro carbon martensite, outer side of the barrel body with a special polishing processing, then the pretreated water flows in the tube, it will receive enough line volume of ultravioletirradiation253.7nm, which showsexcellent germicidal efficacy, but also effectively reduces the influence on ultra pure water.
Product features
1.SS304 or SS316 stainless steel reactor..
2.Quartz sleeve to ensure the best working temperature.
3.Comprehensive sterilization, efficient and fast, sterilization rate is up to 99.9%.
4.High output, physical sterilization, without negative effects, without secondary pollution.
5.Full stainless steel shell, adopting European technology, smooth inner wall, without blind zone.
6.Equipment is cleaning and polishing, applicable to high purifying environment.
7.The electrical device is configured to apply in the market around the world.
8.With special design and convenient operation.
The UV water disinfection system NOT intended for the treatment of water that has an obvious contamination or intentional source, such as raw sewage, nor is the unit intended to convert wastewater to microbiologically safe drinking water.
Water Quality (in)
Water quality plays a major role in the transmission of germicidal UV rays. It is recommended that the water does not exceed following maximum concentration levels
Maximum Concentration Levels (Very Important)
Iron | ≤0.3ppm(0.3mg/L) |
Hardness | ≤7gpg(120mg/L) |
Turbidity | ≤1NTU |
Manganese | ≤0.05ppm(0.05mg/L) |
Tannins | ≤0.1ppm(0.3mg/L) |
UV Transmittance | ≥750‰ |
Effectively treating water with higher concentration levels than listed above can be accomplished, but may require added measures to improve water quality to treatable levels. If, for any reason, it is believed the UV transmission is not satisfactory, contact the factory.
UV wavelength (nm)
DOSAGE is the product of intensity & time dosage=intensity*time=micro watt/cm2*time=microwatt-seconds per square centimeter (μW-s/cm2) Note:1000μW-s/cm2=1mj/cm2(milli-joule/cm2) |
As a general guideline, the following are some typical UV transmission rates (UVT)
City water supplies | 850-980‰ |
De-ionized or Reverse Osmosis water | 950-980‰ |
Surface waters(lakes, rivers, etc) | 700-900‰ |
Ground water(wells) | 900-950‰ |
Other liquids | 10-990‰ |
Parameter
Customization Available
Instruction:
Power supply for equipment is 220V/50HZ, lifespan for UV lamp is ≥ 9000 hours.
The technical parameter provided for the equipment is suitable for water purification water disinfection, such as tap water, purified water, aquaculture water, water for food processing, dual water supply and pharmaceuticals.
Bactericidal efficiency depends on the transparency, impurity and temperature of the water body, a minimum of 99.9% or special design.
As the requirements of customers,we configure a variety of advanced online monitoring instruments and remote control system, such as ultraviolet lamp control system, UV intensity monitoring system, the temperature detection system, disinfection time accumulation system.
According to the customer's requirement, to configure the manually cleaning device or automatic cleaning device.
Potable Water Ultraviolet Irradiation Disinfection 254nm UV Sterilizer
Potable Water Desinfection Device Auto-cleaning 254nm UV Germicidal Sterilizer
After-sale service:800-827-87-226
Guarantee period:1 year
Why Choose YLD as your magnet product supplier: Fast reply, professional advise.
1) Prompt reply time: Office time (GMT+8), reply in 3 hours
Off office time, reply in 12 hours
2) Fast and strict Quality control and Delivery control
3) Super Strong Magnet, 400 types in stock, serve for above 1000 customers, specialized in N35, N38 etc.normal grade magnets and high performance small size magnets.
4) ALIBABA qualified “Manufacture and Trading company”. 10 year magnet manufcture experience, 4 year magnet export experience.
5) Strong development capability of magnet with 3M glue, stainless steel hardware products, magnet with plastic products and other custom made magnet assembly.
6) Train service and timely feedback for mass production.
China
