CE Palm Kernel Shell Biomass Generator for Electricity Generating Set

Scope of Application 
Waste to electricity, such as the wood chips, saw dusts, rice husk, straw, nut shell and so on, gasified by biomass gasifier to get the biomass gas and realize electricity generation. 

Advantage 

Advanced configuration keep accurate ans stable working condition under high speed working speedHigh generalization, easy maintenance, low maintenance cost.Economical, low operating costReduced the carbon deposition on the wear of the engine cylinder and the valve to prolong the using life of the genset.Adopt one of the world's most advanced gas control technology, fully available to the characteristics of fuel gas.Powerful low pressure gas SPI (single point Injection) system used for various supercharger premixed engine.Suitable for differnt concentration methane and propane, variety of quality gas.Precise air-fuel ratio rarefied combustion control and Generator speed/load controlRealize lean burn, reduce the intake pipe tempering and improved efficient to reduce the heat load.

 Within 1m from pressure regulating valve of gas intake

LHV ≥ 4.2MJ/Nm3Pressure of natural gas: 5-20kpa, rate of pressure change ≤ 1kpa/minH2S ≤ 200mg/Nm3Tar content ≤ 20mg/Nm3Nm3 ≤ 20mg/Nm3Impurity particle size ≤ 5μm, impurity content ≤ 30mg/Nm3Moisture content ≤ 40g/Nm3 

High Configuration

Ignition system:  ALTRONIC(USA)Starting system: DC24V electric motor. Mixer: IMPCO(USA)  Sparking plug:STITTEngine Control System: Woodward(USA), HEINZMANN(Germany)Electric Control System: ComAp(Czech), Deepsea(UK)Alternator: Siemens, LEROY-SOMER, Marathon  

FAQ: 
1.How to choose the right model? 
A: It depends on continuous output power, Voltage, Frequency and fuel type.  Please tell me what fuel (natural gas, biogas, biomass gas,wood syngas, methane,coal gas) or raw material(like wood, grass, nutshell and so on) The right model of generator will be recommend soon.
Me and our engineers are always available at your service.
2.What is the oil consumption and capacity per hour? 
A: 1.0g of lubricant oil consumption per hour. 
1.0-1.8KG biomass produce 1kw.h power 
3.What is the overhaul? 
A: About 30000 working hours. A week is enough to finish.  We offer manual for weekly, monthly and overhaul maintenance.
4. How is the after sale service and maintenance? 
A: We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.
5. What products we offer?
Biomass gasifier,Biomass/syngas generator,biogas generator,Natural gas(CNG,LNG) / methane generator,Coal gas generator,Diesel generator.
Generators can parallel together to form large power, E.g. 5 sets 400kw biomass generator form 2000kw biomass generator system. 
Our Services
  1.Pre-sale service:  
A.Our engineers are available for onsite prospect before installation free to charge. 
B. Foundation drawing and detailed Dimension free form us.
2.Sale service:
A. Onsite overall guide installation,operation and maintenance training . 
B. Assistance and instruction of trial running. 
3.After-sale service: 
A. 24 hours online or in person after sale service. 
B.12 months warranty. We take care of all errors/breakdowns in this period. 
4.Spare parts service: 
A.All spares parts on our gensets supplied by us. 
B. Free spare parts together with genset when shipping.

Any questions, please contact me freely.