al based/wood based Activated Carbon Powder for Syrup solution
Product description:
Powder Activated Carbon are grinded into suitable power size by qualified activated carbon.
Due to the advantage of powder state, its can diffuse and contact with the treated media
completely, which will be benefit to the increase of the absorptive efficiency, the series
carbon is mainly used for purification of drinking water, deep treatment of industrial waste,
the decolorized and refining treatment of solvents etc.
Application
It is widely used for decolorization, purification and refining of glucose, sucrose, maltose,
citric acid, cystine, lipid and other chemical products. And also ,it is used in edulcoration
and decolorization of food, medical,aginomoto industry, and in water treatment.
Production progress
1. Picking up the best anthracite
2. Milling the anthracite to be powder as 200mesh.
3. Mixing the anthracite, tar and water. ( Stirring the tar in the first 10 mins, and then put water
for stirring for 5 mins to shape the carbon to be different size).
4. Drying the carbon for 24 hours.
5. Carbonized the carbon.
6. Activated the carbon.
7. Packaging
Specification
Package:
25kg into a polywoven bag, PE lined.
50kg into a poly woven bag, PE lined.
500kg or 1000kg into a jumbo bag.
According to customer's requirements.
Product description:
Powder Activated Carbon are grinded into suitable power size by qualified activated carbon.
Due to the advantage of powder state, its can diffuse and contact with the treated media
completely, which will be benefit to the increase of the absorptive efficiency, the series
carbon is mainly used for purification of drinking water, deep treatment of industrial waste,
the decolorized and refining treatment of solvents etc.
Application
It is widely used for decolorization, purification and refining of glucose, sucrose, maltose,
citric acid, cystine, lipid and other chemical products. And also ,it is used in edulcoration
and decolorization of food, medical,aginomoto industry, and in water treatment.
Production progress
1. Picking up the best anthracite
2. Milling the anthracite to be powder as 200mesh.
3. Mixing the anthracite, tar and water. ( Stirring the tar in the first 10 mins, and then put water
for stirring for 5 mins to shape the carbon to be different size).
4. Drying the carbon for 24 hours.
5. Carbonized the carbon.
6. Activated the carbon.
7. Packaging
Specification
| Analysis Projec | Test data | Analysis Project | Test data |
| Iodine value | ≥1000mg/g | Packing density | 0.38-0.45g/ c m3 |
| Surface area | >1000 m2 /g | Drying alkali | ≤10% |
| The total pore volume | >0.9 c m3 /g | Strength | ≥90% |
| Powder adsorption rate of benzene | ≥450mg/g | PH value | ≥7 |
Package:
25kg into a polywoven bag, PE lined.
50kg into a poly woven bag, PE lined.
500kg or 1000kg into a jumbo bag.
According to customer's requirements.
China
