Custom Copper Bus Bar For Electrical Substation
We've customized huge amount of Custom Copper Bus Bar For Electrical Substation for customers all around the world. The photos below are real shots for your reference.
1) formal drawings, we'll quote for you very soon
2) draft drawings, we'll share our advice for you to finalize the drawing before quote
3) just certain thoughts, our engineers will be able to make drawings for your confirmation
| Main Material | Copper, Aluminum |
| Length Range | 1mm - 6000mm |
| Width Range | 1mm - 200mm |
| Thickness Range | 0.2mm - 40mm |
| General Tolerance | +/- 0.1mm |
| Plating | Tin, Nickel, Silver, etc. |
| Insulation | Heat-shrink Tube, Powder Coating |
| Processing | Punching, Bending, Tapping, Riveting, Plating, Heat-Shrinking, Powder Coating, etc. |
Regarding the inspection of Custom Copper Bus Bar For Electrical Substation, the dimension check is a MUST. If your busbar contains plating or insulation, there could also be testings on plating thickness and insulation voltage, etc. Please just let us know if there's any requirement on inspection.
Usually, the carton is used to pack all the busbars.
In some cases, the wooden case is used to pack several cartons together.
Custom Copper Busbars
Custom Aluminum Busbars
Custom Flexible Copper/Aluminum Busbars
Since January 2005, HRY has been a manufacturer of custom machining products for over 13 years. We understand quite well that, to live long in this industry, we must concern on both perfect products and unparalleled services. For the past years, HRY has obtained rich resources, complete facilities and professional techniques to provide fabrication service for custom metal parts, especially custom copper busbar and aluminum busbar.
We have a large inventory with various specs of copper bar profiles, which allows us to supply many common-spec copper busbar very fast. Punching, bending, drilling, tapping, riveting, plating, heat-shrinking, powder coating, laser marking…, almost every process you can imagine on the fabrication of copper busbar, can be perfectly done here. With years’ profession in this industry, our staff have a good understanding of many details that your may require for your custom fabrication, which enables us to run with high efficiency during communication.
You are always welcome to come to us to know more about our products and services.
Send A Message
Turn to the end of this page to send a message to us via Alibaba.
Send An Email
sales_at_hryindustry.com
PS: Please replace "_at_" with "@"
Place A Call
Mobile: +86 185 5966 6780 (Frank)
China